Optimization of phosphoric acid activation on palm shell activated carbon for bio-battery
DOI:
https://doi.org/10.19109/vxrt5e83Keywords:
phosphoric acid, activated carbon, palm shell, bio-battery, renewable energyAbstract
The increasing global energy crisis and environmental issues arising from conventional battery waste have stimulated the exploration of sustainable and eco-friendly energy storage systems such as bio-batteries. This research investigated the influence of phosphoric acid (H3PO4) concentration on the characteristics of activated carbon produced from palm shell biomass and its performance in a bio-battery system. Palm shells were carbonized at 500oC and chemically activated using H3PO4 solutions with concentrations of 1 M, 1.5 M, 2 M, 2.5 M and 3 M in a mass-to-volume ratio of 1:2. The resulting activated carbon was employed as a solid-static electrolyte in a bio-battery with aluminum as the anode and copper as the cathode. The battery performance was evaluated under a constant load using a 2-volt LED, measuring voltage, current, power output and capacity. The results indicated that increasing the H3PO4 concentration improved the iodine adsorption capacity, surface porosity (based on SEM analysis), and electrochemical behavior of the bio-battery. The optimum results were achieved at 3 M H3PO4, producing an iodine adsorptiion capacity of 888.3 mg/g, a maximum voltage of 3.66 V, and a power output of 9.835 mW. It was concluded that 3 M H3PO4 yielded activated carbon with optimal physicochemical properties for bio-battery applications, supporting the development of renewable and environmentally friendly energy technologies.
References
D. Ernawati, M. Arifudin, and S. B. Husodo, “Baterai Ramah Lingkungan dari Limbah Serbuk Kayu Merbau (Intsia Bijuga) dan Matoa (Pometia SP.) (Eco-friendly Battery From Merbau (Intsia Bijuga) And Matoa (Pometia SP.) Sawdust),” J. Ilmu dan Teknol. Kayu Trop., vol. 17, no. 1, pp. 83–89, 2019.
D. R. Lobato-Peralta, P. U. Okoye, and C. Alegre, “A review on carbon materials for electrochemical energy storage applications: State of the art, implementation, and synergy with metallic compounds for supercapacitor and battery electrodes,” J. Power Sources, vol. 617, p. 235140, 2024, doi: https://doi.org/10.1016/j.jpowsour.2024.235140.
Y.-S. Oh, S. W. Seo, J. Yang, M. Jeong, and S. Ahn, “Eco-Friendly, Biomass-Derived Materials for Electrochemical Energy Storage Devices,” 2025. doi: 10.3390/coatings15080915.
K. S. Ukanwa, K. Patchigolla, R. Sakrabani, and E. Anthony, “Preparation and Characterisation of Activated Carbon from Palm Mixed Waste Treated with Trona Ore,” 2020. doi: 10.3390/molecules25215028.
P. Iurilli, L. Luppi, and C. Brivio, “Non-Invasive Detection of Lithium-Metal Battery Degradation,” 2022. doi: 10.3390/en15196904.
P. Rex, K. R. Mohammed Ismail, N. Meenakshisundaram, P. Barmavatu, and A. V Sai Bharadwaj, “Agricultural Biomass Waste to Biochar: A Review on Biochar Applications Using Machine Learning Approach and Circular Economy,” 2023. doi: 10.3390/chemengineering7030050.
R. Haider, S. Sagadevan, N. R. Cameron, and M. R. Johan, “Biomass-derived activated carbon for high-performance energy storage devices,” J. Power Sources, vol. 633, p. 236404, 2025, doi: https://doi.org/10.1016/j.jpowsour.2025.236404.
F. S. Ayuningtias, L. Barus, and S. Indarwati, “Utilization of Oil Palm Shell Waste (Elaeis guineensis Jacq) into Activated Charcoal,” Ruwa Jurai J. Kesehat. Lingkung., vol. 19, no. 1 SE-, pp. 34–40, Jun. 2025, doi: 10.26630/rj.v19i1.4886.
S. Nasir, M. Z. Hussein, Z. Zainal, N. A. Yusof, and S. A. Mohd Zobir, “Electrochemical Energy Storage Potentials of Waste Biomass: Oil Palm Leaf- and Palm Kernel Shell-Derived Activated Carbons,” 2018. doi: 10.3390/en11123410.
I. Neme and G. Gonfa, “Activated carbon from biomass precursors using phosphoric acid: A review,” Heliyon, vol. 8, p. e11940, Dec. 2022, doi: 10.1016/j.heliyon.2022.e11940.
M. Zięzio, B. Charmas, K. Jedynak, M. Hawryluk, and K. Kucio, “Preparation and characterization of activated carbons obtained from the waste materials impregnated with phosphoric acid(V),” Appl. Nanosci., vol. 10, no. 12, pp. 4703–4716, 2020, doi: 10.1007/s13204-020-01419-6.
M. Herlambang et al., “Optimization and Characterization of Adsorbent from Palm Kernel Shell Waste Using H3PO4 Activator,” CHEESA Chem. Eng. Res. Artic., vol. 6, pp. 118–125, Dec. 2023, doi: 10.25273/cheesa.v6i2.15906.118-125.
G. Rumbino, L. Maniambo, M. Soll, G. Dirgantari, and O. Togibasa, “Performance Enhancement of Biobattery from Tropical Almond Paste Using Acetic Acid Addition,” Indones. J. Appl. Phys., vol. 13, no. 1, p. 99, 2023, doi: 10.13057/ijap.v12i2.61245.
T. Tiara, R. Fadilah, and F. Fitriani, “Development of a Banana Peel Waste-Based Bio-Battery as a Learning Media on Voltaic Cell Material,” J. Penelit. Pendidik. IPA, vol. 11, no. 8, pp. 902–907, 2025, doi: 10.29303/jppipa.v11i8.12086.
A. Kraytsberg and Y. E. Eli, “Biomaterials for advanced Li and Li-ion batteries,” J. Solid State Electrochem., 2025, doi: 10.1007/s10008-025-06268-3.
N. Singh, S. Tanwar, B. C. Yadav, and A. L. Sharma, “High efficient activated carbon-based asymmetric electrode for energy storage devices,” Mater. Today Proc., vol. 57, pp. 5–10, 2022, doi: https://doi.org/10.1016/j.matpr.2022.01.061.
Yuliusman and T. M. Afifah, “Production of palm shell based activated carbon by two stage phosphoric acid impregnation and physical activation,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1173, no. 1, p. 012019, 2021, doi: 10.1088/1757-899x/1173/1/012019.
U. Almira, A. Sasmita, M. Prodi Teknik Lingkungan, D. S. Teknik Lingkungan Program Studi Teknik Lingkungan, and D. S. Agroteknologi Program Studi Agroteknologi, “Analisis Kadar Air, Kadar Abu, Volatil Dan Fixed Carbon Pada Biochar Cangkang Sawit Dengan Variasi Suhu Pirolisis,” Jom Fteknik, vol. 8, pp. 1–5, 2021.
M. Ahiduzzaman and A. K. M. Sadrul Islam, “Preparation of porous bio-char and activated carbon from rice husk by leaching ash and chemical activation,” Springerplus, vol. 5, no. 1, p. 1248, 2016, doi: 10.1186/s40064-016-2932-8.
H. Harmiansyah, P. W. Dari, S. Wahyuni, S. D. Rahmawati, N. M. T. Wati, and A. K. Putri, “Karakteristik arang dari cangkang kelapa sawit sebagai bahan dasar utama pembuatan biobriket,” Sultra J. Mech. Eng., vol. 2, no. 1, pp. 29–36, 2023, doi: 10.54297/sjme.v2i1.442.
A. Budianto, E. Kusdarini, S. Effendi, and M. Aziz, “The Production of Activated Carbon from Indonesian Mangrove Charcoal,” IOP Conf. Ser. Mater. Sci. Eng., vol. 462, p. 12006, Jan. 2019, doi: 10.1088/1757-899X/462/1/012006.
M. Marìn, “Activated carbons from coconut shell by chemical activation. A first approach to a quantitative relation between textural parameters and preparation conditions,” Afinidad, vol. 59, pp. 119–126, Mar. 2002.
X. Chen, R. Paul, and L. Dai, “Carbon-based supercapacitors for efficient energy storage,” Natl. Sci. Rev., vol. 4, pp. 1–37, Apr. 2017, doi: 10.1093/nsr/nwx009.
W. Xiang et al., “Enhanced adsorption performance of phosphoric acid activated biochar from in-situ pre-carbonized bamboo shoot shells,” Ind. Crops Prod., vol. 226, p. 120719, 2025, doi: https://doi.org/10.1016/j.indcrop.2025.120719.
N. Fitrya, S. P. Wirman, and R. D. Rahayu, “Environmentally Friendly Emergency Lighting System Using Bio Batteries from Pineapple Skin Waste as Energy Source,” J. ILMU Fis. | Univ. ANDALAS, vol. 13, no. 2 SE-Research Article, pp. 118–125, Sep. 2021, doi: 10.25077/jif.13.2.118-125.2021.
S. M. Villota et al., “Microwave-Assisted Activation of Waste Cocoa Pod Husk by H 3 PO 4 and KOH—Comparative Insight into Textural Properties and Pore Development,” ACS Omega, vol. 4, pp. 7088–7095, Apr. 2019, doi: 10.1021/acsomega.8b03514.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 lety Tanjung

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
- The author saves the copyright and gives the journal simultaneously with the license under Creative Commons Attribution License which permits other people to share the work by stating that it is firstly published in this journal.
- The author can post their work in an institutional repository or publish it in a book by by stating that it is firstly published in this journal.
- The author is allowed to post their work online (for instance, in an institutional repository or their own website) before and during the process of delivery. (see Open Access Effect).







.png)



